.
.

Stryker gmrs distal femur pdf writer >> DOWNLOAD

Stryker gmrs distal femur pdf writer >> READ ONLINE

.
.
.
.
.
.
.
.
.
.

bony aspect of the distal femur. This posi-tion will allow a 2mm distal femoral “clean up” cut to be made. The appropriate left or right femoral collar may be attached to the tower to assist in setting the final depth and rotation of the instrument (Figure 3a). Technical Hint: To impact and extract the assembly in and out of
Methods: Femoral cadaveric specimens were thawed and cut at the distal end of the femur, at 13 cm from the distal joint line, to e represent a distal femoral tumor resection. Stryker GMRS uncemented stems were placed, after femoral reaming, into the distal femoral canal with firm, hand pressure applied via a customized, spring-based insertion
stability within the femur for different stem (Stryker GMRS) diameters (13, 14, and 15 mm) for the Stryker GMRS uncemented press-fit stems/(Stryker Global Orthopaedics) Methods: Femoral cadaveric specimens were thawed and cut at the distal end of the femur, at 13 cm from the distal joint line, to e represent a distal femoral tumor resection.
Distal Femoral Resection with Endoprosthetic Reconstruction Martin Malawer OVERVIEW The distal femur (Figure 30.1)is the most common site of osteosarcoma. Patients with osteosarcoma of the distal femur have traditionally been treated with a high above-knee amputation. Today, with earlier diagnosis and
Patients with failed distal femoral megaprostheses often have bone loss that limits reconstructive options and contributes to the high failure rate of revision surgery. The Compress ® Compliant Pre-stress (CPS) implant can reconstruct the femur even when there is little remaining bone. It differs
Download >> Download Trigen humeral nail surgical technique pdf writer Read Online >> Read Online Trigen humeral nail surgical technique pdf writer Official Full-Text Paper (PDF): Fracture of an expandable intramedullary nail. Surgical technique for nail removal. The compliance of the nail construct was adjusted by over-drilling the near cortex reliable fracture union since the surgeon can
Chronic Osteomyelitis of the Distal Femur Treated with Resection and Delayed Endoprosthetic Reconstruction: A Report of Three Cases SeanRyan,1 WilliamEward,2 BrianBrigman,2 andRobertZura3 a large Stryker GMRS distal femoral endoprosthesis with
Hi all, I had a Stryker GMRS inserted in August of 2010 to replace my distal femur, knee and top of tibia. It was my 3rd operation to excise the Stage II Chondrosarcoma in the base of my Femur along with the soft tissue on the outside of my left knee (aswell as resolving a benign tumor on the tip of my tibia).
You must have JavaScript enabled to use this app.
Distal femur fractures (DFFs) are unusual and difficult to deal. Their incidence range from 0.3 to 2.5% and are prevalent in female gender with a ratio of M:F = 1:3. Young as well as elderly patients can undergo a distal femur fracture by different mechanisms.
updated Global Modular Replacement System (GMRS; Stryker/Howmedica Inc., Mahwah, NJ; FIG 3C-E). This system was designed to provide modular replace-ments for the proximal humerus, proximal femur, total femur, distal femur, and proximal tibia and has been instru-mental in the widespread adoption of endoprosthetic recon-
updated Global Modular Replacement System (GMRS; Stryker/Howmedica Inc., Mahwah, NJ; FIG 3C-E). This system was designed to provide modular replace-ments for the proximal humerus, proximal femur, total femur, distal femur, and proximal tibia and has been instru-mental in the widespread adoption of endoprosthetic recon-
Materials and methods. The department’s electronic database was searched for all patients undergoing revision of total knee arthroplasty. From these, all patients having distal femoral replacement for periprosthetic fracture around the distal femoral component using the Stryker Global Modular Replacement System (GMRS) implant were filtered.
traditionally been used to evaluate im- sisted of Stryker GMRS short straight Anchoring the distal femoral stem in di- plant stability, axial distraction examines fluted designs 11 to 15 mm in diameter. aphyseal bone and obtaining an adequate another load that occurs during gait (from All attempts were made to achieve the press-fit maximizes tumours of the distal femur. Most femoral stems, however, are straight and therefore poorly fit the anteriorly bowed curvature of the femur. To address this issue, we used a short, curved, uncemented press-fit femoral stem and evaluated its short-term outcomes after reconstruction of the distal femur.

Prinz und bettelknabe pdf
Proceso de clarificacion del agua pdf
207
Instructivo enes pdf
Pillala perlu pdf