.
.

Por 15 marine clean instructions for feather >> DOWNLOAD

Por 15 marine clean instructions for feather >> READ ONLINE

.
.
.
.
.
.
.
.
.
.

POR-15® (enough to cover 6 square feet with 2 coats), a half-pint of METAL-READY™, two wooden handle paint brushes, and a pair of our special high-dexterity surgical latex gloves, PLUS an 8-ounce bottle of our famous MARINE CLEAN™, the world’s greatest WATER BASED degreaser. Cover in POR-15 Marine Clean. Let it sit for 15 minutes. Approx 3-4 songs on the radio. Make sure everything stays wet and covered don’t worry about how much you use, make sure it is mixed 1-1 and that the solutions HOT. You can safely put the mix/spray bottle in the microwave if it has cooled or if you are using leftover.
It won’t hurt previously painted surfaces. Keep the area wet for at least 20 minutes. then rinse with water, make sure it is DRY before applying POR15. When POR15 has a slight finger drag apply second coat. Again, when a slight finger drag, apply top coat. If the POR 15 you applied has fully dried you must lightly sand before applying any top coat.
From the instructions it is more desirable to paint it on during a VERY dry day and it drys best in high humitity. The instructions say to “First Use Marine Clean to clean the surface, when clean rinse with water and allow area to dry” “Second spray metal ready on surface full strength, keep wet for 15-20 minutes then rinse with water and allow
To clean exterior surfaces of cars or boats, use dilutions beginning at 1 part Marine Clean to 5 parts water through to10 parts water. Always remember to thoroughly rinse off Marine Clean with
POR-15® Rust Preventive Coating is a high performance coating designed for application directly on rusted or seasoned metal surfaces. POR-15® Rust Preventive Coating is non-porous and seals and protects many surfaces from water, chemicals, salt, and other corrosive contaminants.
For Auto Body and Paint Supplies visit CollisionBlast.com/Supplies For FREE access to training at CollisionBlast.com DIY Por 15 Part 1 – Ho
Here’s the good part, I sprayed POR-15’s Marine Clean, full strength all over the interior of the body and let it stand for about 15-20 minutes while I hooked up my 1100 psi K’Archer vapor blaster. Then I did the interior with the K’Archer.
POR-15®® can be used in USDA inspected facilities per can be used in USDA inspected facilities per USDA – FSIS Directive, No. 11,000.4 POR-15/RPP Step 1 – MARINE CLEAN® DEGREASER MARINE CLEAN™, is a water-based industrial degreaser used for removing all visible oil, grease, soil, dirt, and other
Unlike dual-stage coatings, POR-15 requires no catalyst. It’s typically applied with a roller and can even be top-coated by using the proper primer. POR-15 has created a 3-step application process using: POR-15 Cleaner/Degreaser (formerly Marine Clean) POR-15 Metal Prep; POR-15 Rust Preventative Coating; Watch the video below for an overview
POR-15 MARINE CLEAN – Quart by POR-15. 3.4 out of 5 stars 25 ratings. Currently unavailable. We don’t know when or if this item will be back in stock. This fits your . Make sure this fits by entering your model number. MARINE CLEAN removes grease, oil, mildew, algae MARINE CLEAN removes musty odors, soap films, wax.
POR-15 GLISTEN PC CLEAR COAT POR-15® Restoration Products Application Information POR-15/PC POR-15 Inc. P.O. Box 1235 Morristown, NJ 07962 P: (800) 457-6715 / F: (973) 887-8007 / Web: por15.com Please read and understand these instructions thoroughly. Failure to do so can result in premature coating failure. PRODUCT DESCRIPTION
POR-15 GLISTEN PC CLEAR COAT POR-15® Restoration Products Application Information POR-15/PC POR-15 Inc. P.O. Box 1235 Morristown, NJ 07962 P: (800) 457-6715 / F: (973) 887-8007 / Web: por15.com Please read and understand these instructions thoroughly. Failure to do so can result in premature coating failure. PRODUCT DESCRIPTION
WHAT TEMPERATURE AND HUMIDITY CAN I APPLY POR-15 IN ? POR-15 should be applied in temperatures of 50-90oF degrees (10-38oC) and humidity under 80% SUPPLEMENTARY INFORMATION & TIPS SEASONED OR RUSTED METAL: First, wire brush loose rust and scale. Then remove any grease or oil with POR-15 MARINE=CLEAN and prep with POR-15 METAL-READY.
POR-15® Marine Clean (do not use solvent-based preps). If RestoGRIP® is intended to cover rusted areas, ? rst paint area with POR-15® Rust Preventive Paint. Apply RestoGRIP® to POR-15® coating without sanding if POR-15® coating is less than 6 hours old. If POR-15® coating is more than 6 hours