Home › Forums › Creating networks and synergies with social actors (Communication strategies) › Automatic light switch operation instructions

Tagged: , , , ,

This topic contains 0 replies, has 1 voice, and was last updated by  ibnexfc 3 years, 12 months ago.

Viewing 1 post (of 1 total)
  • Author
    Posts
  • June 20, 2020 at 3:29 am #401167

    ibnexfc
    Participant

    .
    .

    Automatic light switch operation instructions >> DOWNLOAD

    Automatic light switch operation instructions >> READ ONLINE

    .
    .
    .
    .
    .
    .
    .
    .
    .
    .

    leviton automatic light switch programming

    motion sensor switch with manual override

    leviton motion sensor turns on by itself

    leviton motion sensor light switch stays on

    cooper motion sensor light switch instructions

    lutron motion sensor manual

    how to install motion sensor light switch 3 wayoccupancy sensor manual-on/auto off

    lights. OPERATION INSTRUCTIONS. Auto ON Sensor – OS306U: • OS306U will turn on lights VS306U Motion Vacancy Sensor Switch (Manual ON/Auto OFF).
    TURN OFF POWER at circuit breaker or fuse and test Connect wires per WIRING DIAGRAM as follows: NOTE: A For IPS02, lights will automatically turn ON.

    OPERATION INSTRUCTIONS. Auto ON Sensor – OS310U (Occupancy Mode):. • OS310U will turn on lights automatically when a person enters the room.

    lights will turn OFF automatically if motion is not detected within the coverage area Manual-ON/Automatic-OFF operation in accordance with. California Title 24
    Enables the unit to operate as a toggle switch by disabling the. PIR sensor Sensor automatically turns the lights on when it detects occupancy. MANUAL ON.
    operate as ordinary light switch. Activates even when lid is closed. E. OVERRIDE SWITCH MAN: Manual mode. AUTO: Automatic programme mode. F. TIME ON

    The Occupancy Sensor will turn the lights ON when motion is initially Connect wires per appropriate WIRING DIAGRAM as follows: BLACK lead to LINE. Ensure that the Service Switch (refer to Figure 2) is in the AUTO position (middle
    Installation and Operating Instructions is operating and detecting in the lighting zone as desired. Switch 2 – Auto/Manual B (Dual Circuit Versions Only).
    Installation and Operating Instructions is operating and detecting in the lighting zone as desired. Switch 2 – Auto/Manual B (Dual Circuit Versions Only).
    If you are not sure about any part of these instructions, consult an electrician. • Clean outer Connect wires per WIRING DIAGRAM as follows: • Green or bare Auto On: Lights will automatically turn ON when room is occupied or motion is

  • Author
    Posts
Viewing 1 post (of 1 total)

You must be logged in to reply to this topic. Login here